Cart is empty
0

My Cart

item(s) - USD0.00

Blog

    • 7/24/2017 1:44 AM
    •  | 
    • Comment
    •  | 
    • Posted By: Alunar
    3D printing material as a new technology industry, has developed rapidly in recent years and has become the focus of the world to promote the development of the industry.

    At present, the total amount of 3D printing materials more than 200 kinds, every period of time there will be material born, however, for the development of 3D printing, these materials are far from enough.

    Read More
    • 7/21/2017 4:03 AM
    •  | 
    • 0 Comment
    •  | 
    • Posted By: Alunar
    Patternless Casting Manufacturing(PCM) process is a new rapid forming process combined with the traditional resin bonded sand process. The basic principle is: the principle of discrete / stacked forming of RP technology is adopted, and the contour scanning and spray solidification process are adopted to realize the rapid and direct forming of the casting without appearance. The basic principle is shown in the following figure:
    First, the casting CAD model is obtained from the part CAD model. The STL profile of the casting CAD model is layered to obtain the profile information, and then the level information is used to generate control information.

    Read More
    • 7/20/2017 2:07 AM
    •  | 
    • Comment
    •  | 
    • Posted By: Alunar
    In recent years, more and more attention has been paid to Additive Manufacturing technology, and 3DP technology is one of them. 3DP(Three Dimensional Printing and Gluing), Also referred to as the Binder Jetting,Inkjet Powder Printing.

    3DP technology uses jet binder powder to form solid parts. It has the characteristics of wide range of forming materials, fast manufacturing speed and full color manufacturing. The future research focus will be focused on three aspects: hardware and control, material development and application.

    Read More
    • 7/19/2017 2:22 AM
    •  | 
    • Comment
    •  | 
    • Posted By: Alunar
    LOM process is called Laminated Object Manufacturing, and is one of the most mature rapid prototyping manufacturing technologies. By the American Helisys company Michael Feygin developed in 1986, due to low production cost, high precision, and the wooden prototype manufacturing has a unique inner beauty and some special qualities, since it was invented, has received widespread attention, has been the rapid development and application.

    Read More
    • 7/18/2017 1:56 AM
    •  | 
    • Comment
    •  | 
    • Posted By: Alunar
    "Stereo lithography Apparatus" is abbreviated as SLA. With a laser focus to the light curing material surface specific wavelength and intensity, so from the point to line, from line to surface sequential solidification, to complete a level drawing operation, then the lifting platform in the vertical direction of a layer of the height, and then cured on another level. Such layers constitute a three-dimensional entity. Read More
    • 7/17/2017 2:05 AM
    •  | 
    • Comment
    •  | 
    • Posted By: Alunar
    For the basic knowledge of 3D printing technology, if you want to understand different kinds of 3d printers, can know it from the process of molding. We do a systematic arrangement for everyone to introduce in detail the rapid prototyping 3d printer, in order to uncover the mysterious veil of 3D printing for you.Maybe you should take a few minutes to get a sense of it…… Read More
    • 7/14/2017 1:14 AM
    •  | 
    • 0 Comment
    •  | 
    • Posted By: Alunar
    SLS technology is a widely used technology in the high-end manufacturing field, May be the most far-reaching 3D Printing technology. Originally proposed by C.R. Dechard, a graduate student at the University of Texas.and It was successfully developed in 1989. With this core technology,He formed a company named DTM,Since then DTM has been a major leader in SLS technology.Until 2001,the company was fully acquired by 3D Systems.

    Part 1: SLS 3D Printing Technology Principle Part 2: SLS Advantages & Technical Limitations
    Part 3: SLS Core Technology Materials Sintering Part 4: SLS Print Material Purchase
    Part 5: SLS 3D Printing Application
    Read More
    • 7/12/2017 2:11 AM
    •  | 
    • 0 Comment
    •  | 
    • Posted By: Alunar
    FDM is the abbreviation of "Fused Deposition Modeling", The utility model relates to a method for heating, melting and stacking various kinds of filament materials((such as engineering plastics ABS, polycarbonate PC, etc.).
    Working principle of FDM Advantages of FDM technology Disadvantages of FDM technology
    Alunar FDM 3D Printer FDM 3D printer Filament FDM 3D printing application areas
    Read More
    • 7/11/2017 2:01 AM
    •  | 
    • 0 Comment
    •  | 
    • Posted By: Alunar
    Additive Manufacturing technology is a method of manufacturing solid parts by gradually adding materials. Compared with the traditional material removal - cutting technology, it is a "bottom-up" manufacturing method. In the past twenty years, Additive Manufacturing technology has made rapid development, the "Rapid prototyping", "3D Printing" "and "Solid Free-form Fabrication" and so on, so from different aspects of the expression of the characteristics of this technology. Read More
    • 7/10/2017 2:25 AM
    •  | 
    • Comment
    •  | 
    • Posted By: Alunar
    What can 3D Printer do? May be new contact or want to know 3D Printer people one of the most concerned about. There are many such topics on the internet, But many topics involve a strong professional,Not very suitable for beginners to understand. In order for you to understand the use of 3D Printer, The Alunar team here shares a friend's experience with 3D Printer usage, She's not a professional, Just a 3D Printing fan. Read More
Asc